WebBase : A repository of web pages

WebBase : A repository of web pages

Jun Hirai1, 3   Sriram Raghavan2   Hector Garcia-Molina2   Andreas Paepcke2

1System Integration Technology Center, Toshiba Corp., 3-22 Katamachi, Fuchu, Tokyo 183-8512, Japan
2Computer Science Department, Stanford University, Stanford, CA 94305, USA
jun.hirai@toshiba.co.jp, {rsram, hector, paepcke}@db.stanford.edu


In this paper, we study the problem of constructing and maintaining a large shared repository of web pages. We discuss the unique characteristics of such a repository, propose an architecture, and identify its functional modules. We focus on the storage manager module, and illustrate how traditional techniques for storage and indexing can be tailored to meet the requirements of a web repository. To evaluate design alternatives, we also present experimental results from a prototype repository called WebBase, that is currently being developed at Stanford University.

Keywords : Repository, WebBase, Architecture, Storage management

1. Introduction

A number of important applications require local access to substantial portions of the web. Examples include traditional text search engines [9] [2], related page services [9] [1], and topic-based search and categorization services [18]. Such applications typically access, mine or index a local cache or repository of web pages, since performing their analyses directly on the web would be too slow. For example, the Google search engine [9] computes the PageRank [3] of every web page by recursively analyzing the web's link structure. The repository receives web pages from a crawler, which is the component responsible for mechanically finding new or modified pages on the web. At the same time, the repository offers applications an access interface (API) so that they may efficiently access large numbers of up-to-date web pages.

In this paper, we study the design of a large shared repository of web pages. We present an architecture for such a repository, we consider and evaluate various implementation alternatives, and we describe a prototype repository that is being developed as part of the WebBase project at Stanford University. The prototype already has a collection of around 40 million web pages and is being used as a testbed to study different storage, indexing, and data mining techniques. An earlier version of the prototype was used as the back-end storage system of the Google search engine. The new prototype is intended to offer parallelism across multiple storage computers, and support for a wider variety of applications (as opposed to just text-search engines). The prototype does not currently implement all the features and components that we present in this paper, but the most important functions and services are already in place.

A web repository stores and manages a large collection of data "objects," in this case web pages. It is conceptually not that different from other systems that store data objects, such as file systems, database management systems, or information retrieval systems. However, a web repository does not need to provide a lot of the functionality that the other systems provide, such as transactions, or a general directory naming structure. Thus, the web repository can be optimized to provide just the essential services, and to provide them in a scalable and very efficient way. In particular, a web repository needs to be tuned or targeted to provide:

Scalability: Given the size and the growth of the web [12], it is paramount that the repository scale to very large numbers of objects. The ability to seamlessly distribute the repository across a cluster of computers and disks is essential. Of particular interest to us is the use of network disks [14] to hold the repository. A network disk is a disk, containing a processor, and a network interface that allows it to be connected directly to a network. Network disks provide a simple and inexpensive way to construct large data storage arrays, and may therefore be very appropriate for web repositories.

Streams: While the repository needs to provide access to individual stored web pages, the most demanding access will be in bulk, to large collections of pages, for indexing or data mining. Thus the repository must support stream access, where for instance the entire collection is scanned and fed to a client for analysis. Eventually, the repository may need to support ordered streams, where pages can be returned at high speed in some order. (For instance, a data mining application may wish to examine pages by increasing modified date, or in decreasing page rank.)

Large updates: The web changes rapidly [12] [8][16]. Therefore, the repository needs to handle a high rate of modifications. As new versions of web pages arrive, the space occupied by old versions must be reclaimed (unless a history is maintained, which we do not consider here). This means that there will be substantially more space compaction or reorganization than in most file or data systems. The repository must have a good strategy to avoid excessive conflicts between the update process and the applications accessing pages.

Expunging Pages: In most file or data systems, objects are explicitly deleted when no longer needed. However, when a web page is removed from a web site, the repository is not notified. Thus, the repository must have a mechanism for detecting obsolete pages and removing them. This is akin to "garbage collection" except that it is not based on reference counting.

In this paper we study how to build a web repository that can meet these requirements. In particular,

Our goal is to cover a wide variety of techniques, but to keep within space limitations, we are forced to make some restrictions in scope. In particular, we do make the following assumptions about the operations of the crawler and the repository. Other alternatives are interesting and important, but simply not covered here.

The rest of this paper is organized as follows. In Section 2, we present an architectural description of the various components of the repository, while in Section 3 we concentrate on one of the fundamental components of the architecture- namely the storage manager. In Section 4 we present results from experiments conducted to evaluate various options for the design of the storage manager, while in Section 5 we survey some related work. Finally, we conclude in Section 6.

Figure 1: WebBase Architecture

2. Architecture

Figure 1 depicts the architecture of the WebBase system in terms of the main functional modules and their interactions. It shows the five main modules - the crawler, the storage manager, the metadata and indexing module, the multicast module, and the query engine. The connections between these modules represent exchange of information in the indicated directions.

The crawler module is responsible for retrieving pages from the web and handing them to the storage management module. The crawler periodically goes out to the web to retrieve fresh copies of pages already existing in the repository, as well as pages that have not been crawled before. The storage module performs various critical functions that include assignment of pages to storage devices, handling updates from the crawler after every fresh crawl, and scheduling and servicing various types of requests for pages. Our focus in this paper will be on the storage module, but in this section we provide an overview of all the components.

The metadata and indexing module is responsible for extracting metadata from the collected pages, and for indexing both the pages and the metadata. The metadata represents information extracted from the web pages, for example, their title, creation date, or set of outgoing URLs. It may also include information obtained by analyzing the entire collection. For instance, the number of incoming links for each page (coming from other pages), or citation count, can be computed and included as metadata. The module also generates indexes for the metadata and for the web pages. The indexes may include traditional full text indexes, as well as indexes on metadata attributes. For example, an index on citation count can be used to quickly locate all web pages having more than say 100 incoming links. The metadata and indexes are stored on separate devices from the main web page collection, in order to minimize access conflict between page retrieval and query processing. In our prototype implementation simple metadata attributes are stored and indexed using a relational database.

The query engine and the multicast module together provide access to the content stored in the repository. Their roles are described in the following subsection.

2.1 Access Modes

The repository supports three major access modes for retrieving pages:

Random access: In this mode, a specific page is retrieved from the repository by specifying the URL (or some other unique identifier) associated with that page.

Query-based access: In this mode, requests for a set of pages are specified by queries that characterize the pages to be retrieved. These queries may refer to metadata attributes, or to the textual content of the web pages. For example, suppose the indexing module maintains one index on the words present in the title of a web page and another index on the hypertext links pointing out of a given page. These indexes could together be used to respond to a query such as: "Retrieve the URLs of all pages which contain the word Stanford in the title and which point to http://www-db.stanford.edu/". The query engine (shown in Figure 1) is responsible for handling all such query-based accesses to the repository.

Streaming access: Finally, in the streaming access mode, all, or at least a substantial portion, of the pages in the repository are retrieved and delivered in the form of a data stream directed to the requesting client application. This access mode is unique to a web repository and is important for applications that need to deal with a large set of pages. For example, many of the search applications mentioned in Section 1 require access to millions of pages to build their indexes or perform their analysis. In particular, within the WebBase system, the streaming interface is used by the indexing module to retrieve all the pages from the repository and build the necessary indexes.

The multicast module in Figure 1 is responsible for handling all external requests for streaming mode access. In particular, multiple clients may make concurrent stream requests. Therefore, if the streams are organized properly, several clients may share the transmitted pages. Our goal for the WebBase repository is to make the streams available not just locally, but also to remote applications at other institutions. This would make it unnecessary for other sites to crawl and store the web themselves. We believe it will be much more efficient to multicast streams out of a single repository over the Internet, as opposed to having multiple applications do their own crawling, hitting the same web sites, and on many occasions requesting copies of the same pages.

Initially, WebBase supports stream requests for the entire collection of web pages, in an arbitrary order that best suits the repository. WebBase also supports restartable streams that give a client the ability to pause and resume a stream at will. This requires that state information about a given stream be continuously maintained and stored at either the repository or the client, so that pages are not missed or delivered multiple times. Stream requests will be extended to include requests for subsets of pages (e.g., get all pages in the ".edu" domain) in arbitrary order. Eventually, we plan to introduce order control, so that applications may request particular delivery orders (e.g., pages in increasing page rank). We are currently investigating strategies for combining stream requests of different granularities and orders, in order to improve data sharing across clients.

2.2 Page identifier

Since a web page is the fundamental logical unit being managed by the repository, it is important to have a well-defined mechanism that all modules can use to uniquely refer to a specific page. In the WebBase system, a page identifier is constructed by computing a signature (e.g., checksum or cyclic redundancy check) of the URL associated with that page. However, a given URL can have multiple text string representations. For example, http://www.stanford.edu:80/ and http://www.stanford.edu both represent the same web page but would give rise to different signatures. To avoid this problem, we first normalize the URL string and derive a canonical representation. We then compute the page identifier as a signature of this canonical representation. The details are as follows:

The use of a hashing function implies that there is a non-zero collision probability. Nevertheless, a good hash function along with a large space of hashes makes this a very unlikely occurrence. For example, with 64 bit identifiers and 100 million pages in the repository, the probability of collision is 0.0003. That is, 3 out of 10,000 repositories would have a collision. With 128 bit identifiers and a 10 billion page collection, the probability of collision is 10-18. See [5] for more discussion and a derivation of a general formula for estimating collisions.

3. Storage Manager

In this section we discuss the design of the storage manager. This module stores the web pages on local disks, and provides facilities for accessing and updating the stored pages. The storage manager stores the latest version of every page retrieved by the crawler. Its goal is to store only the latest version (not a history) of any given page. However, two issues require consideration :

Traditional garbage collection algorithms [17] reclaim space by discarding objects that are no longer referenced. The inherent assumption is that all data objects are available for testing, so that non-referenced objects can be identified. This differs from our situation, where the aim is to detect, as soon as possible, whether an object has been deleted in a remote location (a web site) so that it can be similarly deleted from a local copy (the repository). To do this cleanup, the storage manager associates two numerical values with each page in the repository - allowed lifetime and lifetime count. Allowed lifetime represents the time a page can remain in the repository without being refreshed or replaced. When a page is crawled for the first time, or when a new version of the page is received from the crawler, the page's lifetime count is set to the allowed lifetime. Otherwise, the lifetime count of all pages is regularly decremented to reflect the amount of time for which they have been in the repository. Periodically, the storage manager runs a background process that constructs a list of URLs corresponding to all those pages whose lifetime count is about to reach 0. It forwards the list to the crawler, which attempts to visit each one of those URLs during the next crawling cycle. Those URLs in the list for which no pages are received from the crawler during the next update cycle are removed from the repository. If the crawler indicates that it was unable to verify the existence of a certain page, possibly because of network problems, then that page is not expunged. Instead, its lifetime count is set to a very small value to ensure that it will be included in the list next time around.

Note that the crawler has its own parameters [4] for deciding the periodicity with which individual pages are to be crawled. The list provided by the storage manager is only in addition to the pages that the crawler already intends to visit.

For scalability, the storage manager must be distributed across a collection of storage nodes, each equipped with a processor, one or more disks, and the ability to connect to a high-speed communication network. (For WebBase, each node can either be a network disk, or a regular computer.) To coordinate the nodes, the storage manager employs a central node management server . This server maintains a table of parameters describing the current state of each storage node. The parameters include:

Based on this information, the node management server allocates storage nodes to service requests for stream accesses. It also schedules and controls the integration of freshly crawled pages into the repository. In the remainder of this section we discuss the following design issues for the storage manager:

3.1 Page distribution across nodes

We consider two policies for distributing pages across multiple storage nodes.

The hash distribution policy requires only a very sparse global index to locate the node in which a page with a given identifier would be located. This global index could in fact be implicit, if we interpret some portion (say the high order n bits) of the page identifier as denoting the number of the storage node to which the page belongs. In comparison, the uniform distribution policy requires a dense global index that maps each page identifier to the node containing the page. On the other hand, by imposing no fixed relationships between page identifiers and nodes, the uniform distribution policy simplifies the addition of new storage nodes into the system. With hash-based distribution, this would require some form of "extensible hashing". For the same reason, the uniform distribution policy is also more robust to failures. Failure of one of the nodes, when the crawler is providing new pages, can be handled by allocating all new incoming pages to the remaining nodes. With hashing, if an incoming page falls within a failed node, special recovery measures will be called for.

3.2 Organization of pages on disk

Each storage node must be capable of efficiently supporting three operations: page addition, high-speed streaming, and random page access. In this subsection we describe three ways to organize the data within a node to support these operations: hash-based organization , log-structured organization, and hashed-log organization. We defer an analysis of the pros and cons of these methods to a later section where we describe experiments that aid in the comparison.

3.2.1 Hash-based organization

Hash-based organization treats each disk as a collection of hash buckets. Each bucket is small enough to be read into memory, processed, and written back to disk. Each bucket stores pages that are allocated to that node and whose identifiers fall within the bucket's range. Note that this range is different from the range of page identifiers allocated to the storage node as a whole according to the hash distribution policy of Section 3.1. Buckets that are associated with successive ranges of identifiers are also assumed to be physically continuous on disk (excluding overflow buckets if any). Also, we assume that within each bucket, pages are stored in increasing order of their identifiers. Note that at any given time, only a portion of the space allocated to a hash bucket will be occupied by pages - the rest will be free space.

Clearly, this organization is very efficient for random page access since there is no need for a local index to map a page identifier to the physical location on disk. Streaming can also be supported efficiently by sequentially reading the buckets from disk in the order of their physical locations. The effective streaming rate will be some fraction of the maximum disk transfer rate, with the fraction being the average space utilization of the hash buckets.

The performance of hash-based organization during page addition depends on the order in which the pages are received. If new pages are received in a purely random order, then each page addition will require one read of the relevant bucket, followed by an in-memory update, and then a disk write to flush the modified bucket back to disk. Space used by old, unwanted pages can be reclaimed as part of this process. Note that buffering is unlikely to be very useful here since the probability that two buffered pages hash to the same bucket will be very low, given the size and number of hash buckets on a typical disk.

On the other hand, if pages are received in the order of their page identifiers, a more efficient method is possible. In particular, as each bucket is read from disk, a batch of new pages can be added, and then written to disk. (The in-memory addition is simple since the incoming and the stored pages are in order.) As a result, buffering of pages is guaranteed to be much more effective than in the unsorted case. If main memory is available, more than one bucket can be read into memory and merged with the incoming pages, allowing each disk operation to be amortized among even more pages (cf. Scenario 2 of Section 3.3.1).

3.2.2 Log-structured organization

The log-structured page organization is based on the same principles as the Log-structured File System (LFS) described in [15]. New pages received by the node are simply appended to the end of a log, making the process very efficient. To be more specific, the storage node maintains either two or three objects on each disk:

For typical network or PC disk sizes and average web page sizes, the number of pages in the log is small enough that only the leaves of the B-tree need to reside on disk. Therefore, from now on, we will assume that only one disk access is required to retrieve an entry from the B-tree index.

New pages are appended to the end of the log. If we assume that the catalog and B-tree do not necessarily have to be kept continuously up to date on disk, then batch mode page addition is extremely efficient since it involves successively writing to contiguous portions of the disk. The required modifications to the catalog are buffered in memory and periodically flushed to disk. Log space must eventually be compacted, to remove old, unwanted pages. Also, once page addition completes, the B-tree index must be updated.

Random page access requires two disk accesses, one to read the appropriate B-tree index block and retrieve the physical position of the page, and another to retrieve the actual page.

Streaming, with no restrictions on stream order, is very efficient since it merely involves a sequential read of the log. Note that this assumes that all the pages in the log at the time of streaming are "valid". For batch-update systems that perform disk compaction (cf. Section 3.3.1), this assumption is guaranteed to be true. For systems that cannot make the same guarantee, additional disk accesses will be needed to examine the catalog and discard pages whose status flag is not set to "valid".

3.2.3 Hashed-log organization

As the name suggests, the hashed-log organization is a hybrid of the above two organization methods. In this scheme, a disk contains a number of large logs (and their associated catalogs) each similar in structure, but smaller, than the single log used in the pure log-structured organization. Each of these individual logs is typically about 8-10 MB in size. Like hash buckets, each log file is associated with a range of hash values and stores all pages that are assigned to that node and whose page identifier falls within that range. However, there are two major differences between hash buckets and the logs used in the hashed-log organization. First, the logs are much bigger than hash buckets and are therefore expensive to read into memory for each random page access. Second, the pages are not stored in sorted order within each log. As a result, efficient random access in a hashed-log node requires a B-tree index. Page addition in a hashed-log node involves buffering pages in memory, to the extent possible, and appending them to the appropriate logs based on their identifiers. However, the most important feature of this organization (for our purposes) is the ability to stream out pages in sorted order. To accomplish this, logs are read into memory in the order of their associated hash range values, sorted in memory, and then transmitted. Note that we assume that the logs, though much bigger than hash buckets, are still small enough to fit completely in memory. The motivation for such an organization is discussed in Section 4.2.1.

3.3 Update Schemes

We assume that updates proceed in cycles. The crawler collects a set of new pages, these are incorporated into the repository, the metadata indexes are built for the new snapshot, and a new cycle begins. Under this model, there is a period of time, between the end of a crawl and the completion of index rebuilding, when older versions of pages (that are being referenced by the existing index) need to be retained. This will ensure that ongoing page retrieval requests, either through query-based access or streaming mode access, are not disrupted. Thus, we classify all pages in the repository as:

Thus, the update process consists of the following steps:

If the system does not accept random or query-based page access requests until the entire update operation is complete, it is possible to exchange the order of execution of the last two steps. In that case, the class A pages need not be retained until the indexes are rebuilt. The batch update method described in Section 3.3.1 operates in this manner. Besides the batch update scheme, we also briefly describe an incremental update scheme in Section 3.3.2. There are additional options beyond these two. For example, one could have two full copies of the repository, and alternate between them when one copy is updated. We do not discuss these other strategies here.

3.3.1 Batch update scheme

In this update scheme, the storage nodes in the system are partitioned into two sets - update nodes and read nodes. The freshly crawled class C pages are stored on the update nodes whereas class B and class A pages are stored on the read nodes. By definition, the active index set (before rebuilding) references only class A and class B pages - therefore all requests for page retrieval will involve only the read nodes. Analogously, only the update nodes will be involved in receiving and storing pages retrieved by the crawler. Figure 2 illustrates the flow of data between the crawler and the two sets of nodes during the batch update process. The steps for a batch update are as follows :

Figure 2: Batch update strategy

1. System isolation:

  1. The multicast module stops accepting new stream requests.
  2. The crawler finishes adding class C pages to the update disks.
  3. Queries are suspended, and the system waits for ongoing stream transfers to complete.

2. Page transfer:

Class C pages are transferred from the update nodes to the read nodes, and class A pages are removed from the read nodes. The details of these operations depend on both the page organization scheme and the page distribution policy. We discuss some examples of page transfer at the end of this section.

3. System restart:

  1. The class C pages stored in the update nodes are removed. If needed, the crawler can be restarted to start populating the update nodes once more.
  2. All the pages from the read nodes are streamed out to the indexing module to enable index reconstruction. External requests for streaming access can be accepted provided they do not involve access to one or more indexes.
  3. Once the indexes have been rebuilt, the read nodes start accepting random and query-based requests.

The exact mechanism for the transfer of pages between update and read nodes depends on the page organization and distribution policy used in each set of nodes (both the organization and the policy could be different for the two sets). In what follows, we illustrate two possible scenarios for the transfer.

Scenario 1 - Log-structured organization and Hash distribution policy on both sets :

For illustration, let us assume there are 4 update nodes and 12 read nodes. The crawler computes the identifier of each new page it obtains. Pages in the first quarter of the identifier range are stored in update node 1, the pages in the second quarter go to node 2, and so on. When the crawl cycle ends, update node 1 will sub-partition its allocated identifier range into 3 subranges, and will send its pages to the first three read disks. Similarly, update disk 2 will partition its pages to read disks 4, 5 and 6, and so on. Thus, each read disk receives pages from only one update disk. The sequence of steps for transferring pages to the read nodes is as follows:

  1. Each update node i constructs lists Li,j. List Li,j contains the identifiers of class C pages that are currently in i and which are destined for read node j.
  2. Suppose read node j receives a list of pages from the update node i. It then computes L'i,j = Intersection(Li,j, Rj) where Rj denotes the list of identifiers corresponding to pages currently stored in j (note that Rj is directly available by a scan of the catalog).
  3. By definition, L'i,j represents the set of class A pages at read node j. The catalog entries for these pages are located and their status flags are modified to indicate that they have been "deleted".
  4. Next, the read nodes go into compaction mode to reclaim space created by the deletion of these class A pages.
  5. Finally, each update node begins transmitting streams of class C pages to the corresponding read nodes. Each stream contains exactly the pages that are destined for the receiving read node.
  6. Once all the pages have been received, each read node, if necessary, builds a local B-tree index to support random access.

Scenario 2 - Hash-based organization and Hash distribution policy on both sets :

The use of a hash-based node organization allows for certain optimizations while transferring pages to the read nodes. For one, since corresponding class A and class C pages are guaranteed to be present in the same hash bucket, deletion of class A pages does not occupy a separate step, but is performed in conjunction with the addition of class C pages. The steps are as follows :

  1. Each update node reads the hash buckets into memory in the order of their physical locations on disk. As a result (Section 3.2.1), the pages are read in the increasing order of their identifiers.
  2. For each page retrieved from disk, the update nodes determine the read node to which the page is to be forwarded, and transmit the page accordingly.
  3. Each read node begins to receive a sorted stream of pages from one of the update nodes.
  4. The read nodes read their hash buckets into memory in the order of their physical locations on disk. They then execute a "merge sort" that involves both the incoming sorted stream as well the pages that they read from disk. As part of the merge sort, if a page arriving on the stream has the same identifier as one of the pages retrieved from disk, then the former is preferred and the latter is discarded. (This corresponds to replacing a class A page by the corresponding class C page). The resulting merged output is written out to disk as the modified hash buckets. Figure 3 illustrates how the merge sort is executed.

Figure 3: Addition of new pages using merge sort

Advantages of the batch update scheme: The most attractive characteristic of the batch update scheme is the lack of conflict between the various operations being executed on the repository. A single storage node does not ever have to deal with both page addition and page retrieval concurrently. Another useful property is that the physical locations of pages on the read nodes do not change between updates. (This is because the compaction operation, which could potentially change the physical location, is part of the update). This helps to greatly simplify the state information required to support restartable streams as described in Section 2.1. For a given restartable stream, the state information merely consists of a pair of values (Node-id, Page-id) where, Node-id represents some unique identifier for the storage node that contained the last page transmitted to the client before the interruption, and Page-id represents the identifier for that last page.

3.3.2 Incremental update scheme

In the incremental update scheme, there is no division of work between read and update nodes. All nodes are equally responsible for supporting both update and access simultaneously. The crawler is allowed to place the freshly crawled pages on any of the nodes in the system as long as it conforms to the page distribution policy. Analogously, requests for pages through any of the three access modes may involve any of the nodes present in the system. The extraction of metadata and construction of indexes are undertaken periodically, independent of the ingestion of new pages into the repository.

As a result, the incremental update scheme is capable of providing continuous service. Unlike in the batch update scheme, there is no need to isolate the system during update. The addition of new pages into the repository is a continuous process that takes place in conjunction with streaming and random access. Further, this scheme makes it possible to provide even very recently crawled pages to the clients through the streaming or random access modes (though the metadata and indexes associated with these pages may not yet be available). However, such continuous service does have its drawbacks:

Performance penalty: Performance may suffer because of conflicts between multiple simultaneous read and update operations. This performance penalty can be alleviated, to some extent, by employing the uniform distribution policy and having the node management server try to balance the loads. For example, when the node management server detects that a set of nodes are very busy responding to a number of high-speed streaming requests, it can ensure that addition of new pages from the crawler does not take place at these nodes. All such page addition requests can be redirected to other more lightly loaded nodes.

Requires dynamically maintained local index: Consider the case when the incremental update scheme is employed in conjunction with log-structured page organization. Holes created by the removal of class A pages are reclaimed through compaction which has the effect of altering the physical location of the stored pages. This makes it necessary to dynamically maintain a local index to map a given page identifier to its current physical address. This was not necessary in the batch update scheme since the physical location of all the pages in the read nodes was unaltered between two successive updates.

Restartable streams are more complicated: When incremental update is used in conjunction with hash-based page organization, the state information required to support restartable streams gets complicated, since the physical locations of pages are not preserved when there are bucket overflows. However, it turns out that in the case of log-structured organization, it is possible to execute compaction in such a way that despite incremental update, the simple state information used by the batch-update system suffices. The extended version of this paper [10] discusses these issues in further detail.

4. Experiments

We conducted experiments to compare the performance of some of the design choices that we have presented. In this section we will describe selected results of these experiments and discuss how various system parameters influence the "best" configuration (in terms of the update strategy, page distribution policy, and page organization method) for the storage manager.

4.1 Experimental Setup

Our WebBase prototype includes an implementation of the storage manager with the following configuration:

The storage manager is fed pages by an incremental crawler that retrieves pages at the rate of approximately 50-100 pages/second. The WebBase storage manager can run on network disks or on conventional PCs. For the experiments we report here, we used a cluster of PC's connected by a 100 Mbps Ethernet LAN, since debugging and data collection are easier on PCs. In addition to the repository, we have also implemented a client module and a crawler emulator. The client module sends requests for random or streaming mode accesses to the repository, and receives pages from the read nodes in response. The crawler emulator retrieves stored web pages from an earlier version of the repository and transmits it to the update nodes at a controllable rate. Using such an emulator instead of the actual crawler provided us with the necessary flexibility to control the crawling speed, without interacting with the actual web sites.

For ease of implementation, the storage manager has been implemented on top of the standard Linux file system. In order to conform to the operating system limit on maximum file size, the log-structured organization has been approximated by creating a collection of individual log files, each approximately 512 MB in size, on each node.

To compare different page distribution and node organization alternatives, we conducted extensive simulation experiments. The simulation hardware parameters were selected to match our prototype hardware. This allowed us to verify the simulation results with our prototype, at least for the scenario that our prototype implements (batch updates, hash page distribution, log-structured nodes). For other scenarios, the simulator allows us to predict how our prototype would have performed, had we chosen other strategies. All of the performance results in this section are from the simulator, except for those in Table 3 and Figure 4, which report the performance of the actual prototype.

We used the following performance metrics for comparing different system configurations (all are expressed in terms of number of pages/second/node):

Note that all our performance metrics are on a per-node basis. This enables us to present results that are independent of the number of nodes in the actual system. For systems using batch-update, the inherent parallelism in the operations implies that the overall page addition rate of the system (random page access rate) is simply the per-node value multiplied by the number of update nodes (number of read nodes) if we assume that the network is not a bottleneck. For incremental update systems, the scale up is not perfectly linear because of conflict between operations. For batch update systems, an additional performance metric is the batch update time. This is the time during which the repository is isolated and does not provide page access services.

We present some selected experimental results below. The first set of results include a comparison of the three different page organization methods described in Section 3.2, as well as a comparison of different system configurations. The second set of results measure the performance of our implemented prototype. Additional experiments and discussions, that illustrate the optimization process that can be carried out to tune the nodes to handle web data, are included in an extended version of this paper [10].

4.2 Comparing different systems

In this section we present some selected results from our simulator. For simplicity we do not consider network performance, i.e., we assume that the network is always capable of handling any traffic. Performance is solely determined by the disk characteristics and the disk access pattern associated with the system configuration. The architecture of the simulator and the details of the simulation process are described in an extended version of this paper [10].

4.2.1 Comparing page organization methods

In this section, we use Table 1 to analyze the three page organization methods presented in Section 3.2. Note that Table 1 only deals with the performance characteristics of a single node. Overall system performance, though dependent on the performance of an individual node, is also influenced by other factors such as the page distribution policy and the update strategy. These are discussed in the succeeding sections.

Performance characteristics : Table 1 compares these organizations based on their performance characteristics.

Performance Metric
Streaming rate and ordering
6300 pages/sec unsorted
3900 pages/sec sorted
6300 pages/sec sorted
Random page access rate
35 pages/sec
51 pages/sec
35 pages/sec
Page addition rate
(random order, no buffering)
6100 pages/sec
23 pages/sec
53 pages/sec
Page addition rate
(random order, 10MB buffer)
6100 pages/sec
35 pages/sec
660 pages/sec
Page addition rate
(sorted order, 10MB buffer)
6100 pages/sec
1300 pages/sec
1300 pages/sec
Table 1: Comparing page organization methods on a single node (from simulation)
(Hash-based uses 1 million 64KB buckets with 60% average occupancy)

Space usage : The log-structured organization requires space to maintain catalog information. In our experience, the catalog typically contributes an additional space overhead of only 1.2% which implies an effective space utilization of almost 99%. For the hash-based organization, disk space utilization is a function of how empty or full the hash buckets are. Analysis using sample data from our repository indicates that average space utilization for this organization is typically around 60% [10].

Motivation for Hashed-log: The results of Table 1 suggest that in a batch system, update nodes should be log-structured to support a large throughput from the crawler, while read nodes should be hash-based to support high random read traffic. However, to achieve good performance at the read nodes during update, pages transferred to them from the update nodes should arrive in sorted order. The log-structured organization is not capable of providing such a sorted stream. However, the hashed-log organization provides exactly such a facility in conjunction with a reasonably high page addition rate.

4.2.2 Comparing different configurations

To compare different system configurations, we require a notation to easily refer to a specific configuration. We adopt the following convention:

For example, the system configuration for our prototype (as discussed in Section 4.1) can be represented as Batch[U(hash,log), R(hash,log)].

Table 2 presents some sample performance results for three different system configurations that use the batch update method, employ the hash distribution policy, and use hash-based page organization at the update nodes. For this experiment we assume that 25% of the pages on the read nodes are replaced by newer versions during the update process. We call this an update ratio of 0.25. The three configurations differ in the organization method that they employ at the update nodes. The center column gives the page addition rate supported by a single update node (derived earlier). If we multiply these entries by the number of update nodes we get the total rate at which the crawler can deliver pages. The third column gives the total time to perform a batch update of the read disks, and represents the time the repository would be unavailable to clients. The last configuration, which uses a hashed-log organization at the update nodes, provides the best balance between page addition rate and a reasonable batch update time. Note that because of the parallelism available in the batch update systems, the update time does not depend on the number of nodes but is purely determined by the update ratio.

System configuration
Page addition rate
Batch update time
(update ratio=0.25)
Batch[U(hash, log), R(hash, hash)]
11700 secs
Batch[U(hash, hash), R(hash, hash)]
1260 secs
Batch[U(hash, hashed-log), R(hash, hash)]
1260 secs
Table 2: Sample performance results for different configurations (from simulation)

4.3 Experiments on overall system performance

Table 3 summarizes the results of experiments conducted directly on our prototype. Since our prototype employs a log-structured organization on both sets of nodes, it exhibits impressive performance for both streaming and page addition. Note that the results of Table 3 include network delays, and hence the numbers are lower than those predicted by Table 1. In particular, the streaming rate is measured at our client module, and the page addition rate is what the emulated crawler sees.

Performance Metric
Observed value
Streaming rate 2800 pages/sec (per read node)
Page addition rate 3200 pages/sec (per update node)
Batch update time 2451 seconds (for update ratio = 0.25)
Random page access rate 33 pages/sec (per read node)
Table 3: Performance of prototype (from actual measurements)

Figure 4 plots the variation of batch update time with update ratio for our prototype. As before, the update ratio refers to the fraction of pages on the read nodes that are replaced by newer versions. Our prototype system uses a batch update process with stages corresponding to Scenario 1 of Section 3.3.1. Figure 4 shows how each stage contributes to the overall batch update time. (Note that the y-axis in Figure 4 is cumulative, i.e., each curve includes the sum of the contributions of all the stages represented below it). For example, for an update ratio of 0.25, we see that catalog update, page identifier transfer, and B-tree construction require only 26, 84, and 88 seconds respectively. However, compaction requires 1244 secs whereas page transfer requires 1008 seconds. The domination of compaction and page transfer holds at all update ratios. In addition, the figure shows that the time for page transfer remains almost constant, independent of the update ratio. This is because an increase in update ratio requires a corresponding increase in the number of update nodes to accommodate the larger number of pages being received from the crawler. Since page transfer is an operation that each update node executes independently and simultaneously, we are able to achieve perfect parallelism and keep the page transfer time constant. Compaction, on the other hand, exhibits a marked decrease with increase in update ratio. This is reasonable, since at higher update ratios, more class A pages are deleted, thereby leaving behind a smaller set of class B pages to be moved around on the read nodes during compaction.

Figure 4: Batch update time of prototype

4.4 Summary

There is a wide spectrum of system configurations for a web repository, each with different strengths and weaknesses. The choice of an appropriate configuration is influenced by the deployment environment, the anticipated workload, and the functional requirements. Some of the factors that influence this choice are crawling speed, required random page access performance, required streaming performance, node computing power and storage space, and the importance of continuous service. For example, in an environment that includes a high-speed crawler, configurations that perform poorly on page addition, such as Incr[hash, hash] or Batch[U(hash,hash), R(*,*)], are not suitable. Similarly, if continuous service is essential in a certain environment, then none of the batch update based schemes presented in this paper would be applicable. Table 4 presents a summary of the relative performance of some of the more useful system configurations. In that table, the symbols ++, +, +-, -, and -- represent, in that order, a spectrum of values from the most favorable to the least favorable for a given performance metric.

System configuration Streaming Random page access Page addition Update time
Incr [hash, log] + - -- inapplicable
Incr [uniform, log] + -- + inapplicable
Incr [hash, hash] + + - inapplicable
[U(hash, log), R(hash, log)]
++ - ++ +-
[U(hash, log), R(hash, hash)]
+ + ++ --
[U(hash, hash), R(hash, hash)]
+ + - +
[U(hashed-log, hash), R(hash, hash)]
+ + +- +
Table 4: Relative performance of different system configurations

5. Related work

From the nature of their services, one can infer that all web search engines either construct, or have access to, a web repository. However, these are proprietary and often specific to the search application. In this paper, we have attempted to discuss, in an application-independent manner, the functions and features that would be useful in a web repository, and have proposed an architecture that provides these functions efficiently.

A number of web-based services have used web repositories as part of their system architecture. However, often the repositories have been constructed on a much smaller scale and for a restricted purpose. For example, the WebGUIDE system [7] allows users to explore changes to the World Wide Web and web structure by supporting recursive document comparison. It tracks changes to a user-specified set of web pages using the AT&T Difference Engine (AIDE) [6] and provides a graphical visualization tool on top of AIDE. The AIDE version repository retrieves and stores only pages that have explicitly been requested by users. As such, the size of the repository is typically much smaller than the sizes targeted by WebBase. Similarly, GlimpseHTTP (now called WebGlimpse) [13] provides text-indexing and "neighborhood-based" search facilities on existing repositories of web pages. Here again, the emphasis is more on the actual indexing facility and much less on the construction and maintenance of the repository.

The Internet Archive [11] project aims to build a digital library for long-term preservation of web-published information. The focus of that project is on addressing issues relevant to archiving and preservation. Their target client population consists of scientists, sociologists, journalists, historians, and others who might want to use this information in the future for research purposes. On the other hand, our focus with WebBase has been on architecting a web repository in such a way that it can be kept relatively fresh, and be able to act as an immediate and current source of web information for a large number of existing applications.

The use of log-structured organization in our storage manager is based on the work on log-structured file systems described in [15]. However, there are two essential differences between the two systems. The first is the use of multiple disks in WebBase, that enables us to separate the read and update operations across disjoint sets of nodes. The second difference is the need for WebBase to support high-speed streaming, an operation that is not part of the anticipated workload in the design of LFS.

6. Conclusion

In this paper we proposed an architecture for structuring a large shared repository of web pages. We argued that the construction of such a repository calls for judicious application of new and existing techniques. We discussed the design of the storage manager in detail and presented qualitative and experimental analysis to evaluate the various options at every stage in the design.

Our WebBase prototype is currently being developed based on the architecture of Section 2. Currently, working implementations of an incremental crawler, the storage manager, the indexing module, and a query engine are available. Most of the low-level networking and file-system operations have been implemented in C/C++ whereas the query interface has been implemented in Java.

For the future, we plan to implement and experiment with some of the more advanced system configurations that we presented in Section 4.2.2. We also plan to develop advanced streaming facilities, as discussed in Section 2.1, to provide more client control over streams. Eventually, we plan to enhance WebBase so that it can maintain a history of web pages and provide temporal information.


We wish to thank all members of the Stanford WebBase project for their contributions to the design and implementation of the WebBase prototype. We also wish to thank Quantum Inc. for donating the network disks that were used to build our prototype.


[1] Alexa Incorporated, http://www.alexa.com
[2] Altavista Incorporated, http://www.altavista.com
[3] Sergey Brin and Larry Page, The anatomy of a large-scale hypertextual web search engine, Proc. of the 7th Intl. WWW Conference, April 14-18, 1998.
[4] Junghoo Cho and Hector Garcia-Molina, Incremental crawler and evolution of the web, Technical Report, Department of Computer Science, Stanford University. Available at http://www-db.stanford.edu/~cho/papers/cho-incre.ps.
[5] Arturo Crespo and Hector Garcia-Molina, Archival storage for digital libraries, Third ACM Conference on Digital Libraries, June 23-26, 1998.
[6] Fred Douglis, Thomas Ball, Yih-Farn Chen, and Eleftherios Koutsofios, The AT&T Internet Difference Engine: Tracking and viewing changes on the web, World Wide Web, Volume 1, No. 1, January 1998.
[7] Fred Douglis, Thomas Ball, Yih-Farn Chen, and Eleftherios Koutsofios, WebGUIDE: Querying and navigating changes in web repositories, Proc. of the 5th Intl. WWW Conference, May 6-10, 1996.
[8] Fred Douglis, Anja Feldmann, Balachander Krishnamurthy, and Jeffrey Mogul, Rate of change and other metrics: a live study of the world wide web, USENIX Symposium on Internet Technology and Systems, Dec 1997.
[9] Google Incorporated, http://www.google.com
[10] Jun Hirai, Sriram Raghavan, Hector Garcia-Molina, and Andreas Paepcke, WebBase : A repository of pages, Stanford Digital Libraries Project Technical Report SIDL-WP-1999-0124, Computer Science Dept, Stanford University, Nov. 1999. Available at http://www-diglib.stanford.edu/diglib/WP/PUBLIC/DOC319.html
[11] Internet Archive, http://www.archive.org
[12] Steve Lawrence and C. Lee Giles, Accessibility of information on the web, Nature, vol. 400, July 8 1999.
[13] Udi Manber, Mike Smith, and Burra Gopal, WebGlimpse - Combining browsing and searching, Proc. of the 1997 USENIX Technical Conference, Jan 6-10, 1997.
[14] National Storage Industry Consortium - NASD Project, http://www.nsic.org/nasd/
[15] Mendel Rosenblum and John K. Ousterhoust, The design and implementation of a log-structured file system, Proc. of the 13th ACM Symposium on Operating Systems Principles, Oct.1991, pages 1-15.
[16] Craig E. Wills and Mikhail Mikhailov, Towards a better understanding of web resources and server responses for improved caching, Proc. of the 8th Intl. WWW Conference, May 1999.
[17] Paul R. Wilson, Uniprocessor garbage collection techniques, Proc. of the Intl. Workshop on Memory Management, Sept. 1992, pages 1-42.
[18] Yahoo Incorporated, http://www.yahoo.com


Jun Hirai : Jun Hirai received his B.E. and M.E in Electrical and Electronic Engineering from the University of Tokyo, Japan, in 1986 and 1988 respectively. He joined Toshiba Corporation in 1988 and was engaged in research and development in the area of network management and telecommunication technology. He was a visiting scholar in the Computer Science Department at Stanford University from 1998 to 2000. His current interests include information management issues on various scales ranging from the personal level to the World Wide Web, and Internet-related technologies.

Sriram Raghavan : Sriram Raghavan is currently a Ph.D student in the Computer Science department at Stanford University, Stanford, California. He received a Bachelor of Technology degree in Computer Science and Engg. from the Indian Institute of Technology, Chennai, India in 1998. His research interests include information management on the web, large-scale searching and indexing, database and IR systems integration, and query processing.

Hector Garcia-Molina : Hector Garcia-Molina is the Leonard Bosack and Sandra Lerner Professor in the Departments of Computer Science and Electrical Engineering at Stanford University, Stanford, California. From August 1994 to December 1997 he was the Director of the Computer Systems Laboratory at Stanford. From 1979 to 1991 he was on the faculty of the Computer Science Department at Princeton University, Princeton, New Jersey. His research interests include distributed computing systems and database systems. He received a BS in electrical engineering from the Instituto Tecnologico de Monterrey, Mexico, in 1974. From Stanford University, Stanford, California, he received in 1975 a MS in electrical engineering and a PhD in computer science in 1979. Garcia-Molina is a Fellow of the ACM, received the 1999 ACM SIGMOD Innovations Award, and is a member of the President's Information Technology Advisory Committee (PITAC).

Andreas Paepcke : Dr. Andreas Paepcke is a senior research scientist and director of the Digital Library project at Stanford University. For several years he has been using object-oriented technology to address interoperability problems, most recently in the context of distributed digital library services. His second interest is the exploration of user interface and systems technologies for accessing digital libraries from small, handheld devices (PDAs). Dr. Paepcke received BS and MS degrees in applied mathematics from Harvard University, and a Ph.D. in computer science from the University of Karlsruhe, Germany. Previously, he worked as a researcher at Hewlett-Packard Laboratory, and as a research consultant at Xerox PARC.


3 This work was performed while Jun Hirai was a visiting scholar in the Computer Science Department at Stanford University.